3M™ Fibrlok™ II Universal Optical Fiber Splice 2529
 |
• Single mode and multimode fibers |
Features e Benefits
| Features | Benefits |
| < 0.1 dB typical insertion loss | High performance |
| 30 second installation time | Increased productivity |
| Minimum tooling requirements | Low capital cost |
| No epoxy or electricity required | Easy on-site installation |
| Simple, easy to use | Minimal training, lower installed cost |
| Ability to reposition fibers | Improved splicing yield |
| Single splice for any combination 250 μm or 900 μm fibers | Reduced inventory |
Specifications
| Características técnicas | |
| Fiber diameter |
125 μm |
| Coating diameter |
250 or 900 μm |
| Mean insertion loss | <0.1 dB |
| Reflectance | <-35 dB from -40° to 80° C (-40° to 176° F) <-60 dB typical at room temperature |
| Tensile strength | 4.4N (1.0 lb.) minimum; 13.2N (>3.0 lbs.) typical |
| Material |
Engineering thermoplastic with aluminum alloy element; UL 94, V-O rating |
| Operating temperature |
-40° to 80° C (-40° to 176° F) |
| Thermal cycling | Change in insertion loss <0.5 dB, -40° to 80° C (-40° to 176° F) |
| Fungus resistance | ASTM G-21-70; rating 0 |
| Vibration | IEC 61300-2-1 (EIA standard FOTP-11; test condition 1) |
| Water immersion | Seven days @ 43° C; change in insertion loss ≤0.05 dB; 21,000 hours with <0.2 dB change |
| Extended high humidity | 8,812 hours @ 85° C, 85% humidity with <0.2 dB change |
Av. Profa. Ana Maria Silvestre Adade, 499
Parque das Universidades - Campinas - SP
© 2010 American Explorer
